Connect your Modbus energy meters to a live cloud dashboard. Track kWh consumption, peak demand, power factor, and power quality in real time — from any browser, no on-premise servers.
No credit card · No software install · Connect your first meter in 10 minutes
All values streamed live from your Modbus meters
Energy monitoring SCADA collects electrical parameters from energy meters, power analyzers, and smart meters using industrial protocols — primarily Modbus TCP/RTU and MQTT — and presents them on live dashboards accessible from any web browser.
Unlike traditional on-premise SCADA systems that require dedicated servers, this cloud energy monitoring platform requires no hardware beyond a network-connected Modbus gateway. Your meter data streams to the cloud in real time, accessible from office, home, or mobile.
Facilities managers, energy engineers, and sustainability teams use it to identify energy waste, track demand charges, verify power quality, and report energy consumption — without manual meter reading or complex on-site SCADA infrastructure.
Live kWh and kW readings from all connected meters. Spot energy consumption spikes as they happen — not hours later when you read the meter manually.
Track 15-minute and 30-minute demand intervals. Set alarms when demand approaches your contract limit. Avoid costly demand charge penalties on your electricity bill.
Monitor voltage unbalance, total harmonic distortion (THD), power factor, and frequency deviations. Identify power quality issues before they damage equipment.
Connect meters from different buildings, floors, or production lines. Compare consumption per area on one unified dashboard.
Store and visualize energy data over days, weeks, months. Export interval data for billing verification, sustainability reporting, and ISO 50001 energy management.
Set threshold alarms for demand, power factor, voltage, and any Modbus register. Alerts send to email or SMS immediately when the condition triggers.
Connect your Modbus RTU (RS-485) or Modbus TCP energy meter to a gateway (or directly for TCP meters). Most industrial meters from Schneider, ABB, Eastron, and Carlo Gavazzi are supported with preset register templates.
Map Modbus register addresses to energy tags: kWh, kW, voltage, current, power factor. The platform includes preset templates for common energy meter models. Add alarm thresholds for demand and power factor.
Your energy dashboard updates in real time. Share a read-only dashboard link with management or energy auditors. Export reports for billing verification and sustainability reporting.
Manufacturing plants use energy monitoring SCADA to track per-machine and per-line energy consumption, identify idle-time energy waste, and benchmark energy efficiency (kWh per unit produced). Connecting Modbus energy meters on each production line feeder gives granular data that building-level metering cannot provide.
Commercial buildings benefit from floor-by-floor or tenant-by-tenant energy monitoring. Property managers can allocate energy costs accurately, identify HVAC or lighting systems running outside scheduled hours, and prepare sub-metering reports for tenants.
Distributed generation and renewable energy sites use energy SCADA to monitor import/export energy at the grid connection point, track power quality parameters that affect grid compliance, and feed data into sustainability and carbon reporting frameworks.
Energy monitoring SCADA collects electrical energy parameters (kWh, kW, voltage, current, power factor) from meters via Modbus TCP/RTU or MQTT and presents them as live dashboards and historical reports from a web browser. It replaces manual meter reading with continuous, automated data collection accessible from anywhere.
Any energy meter with Modbus RTU (RS-485) or Modbus TCP (Ethernet) output. This includes Schneider Electric PM series, ABB B-series, Eastron SDM series, Carlo Gavazzi EM series, Chint DTSU series, Lovato DMG series, and most other industrial energy meters.
Yes. Connect any number of energy meters from different locations to a single dashboard. Compare consumption per area and view totals alongside individual meter data in real time.
Yes. Configure demand threshold alarms that trigger email notifications when your 15-minute or 30-minute demand interval exceeds a set kW level. Historical demand data is stored and exportable for tariff analysis and bill verification.
A Modbus TCP gateway (a small DIN-rail device, typically $50–$200) is needed to connect RS-485 Modbus RTU meters to your network. For Modbus TCP meters, connect them directly to your network. The SCADA platform runs in the cloud — no on-premise servers or software installations required.
60 days free, no credit card, no hardware to buy beyond a gateway. Connect your first Modbus energy meter and see live data today.